Differences

This shows you the differences between two versions of the page.

--- xro:lothrelectronicsstation [2019-01-13 15:19] – xro
+++ xro:lothrelectronicsstation [2025-11-09 09:25] (current) – external edit 127.0.0.1
@@ Line 12: / Line 12: @@
   * 2x 5pin Jumper-Wire Jack
   * Switching power supply 24V / 3.2A, set to ~27V
-  * [[https://de.aliexpress.com/item/35-watt-elektronische-last-einstellbare-konstante-strom-aging-widerstand-batterie-spannung-kapazit-t-tester-LCD-spannung/32954356498.html | Electronic Load]] (Todo)
+  * [[https://de.aliexpress.com/item/35-watt-elektronische-last-einstellbare-konstante-strom-aging-widerstand-batterie-spannung-kapazit-t-tester-LCD-spannung/32954356498.html | XY-FZ35 Electronic Load]]
+  * 1x USB Serial TTL Converter
+  * 3x Jumper Wires
+=== Manual ===
+[[realraum:minielectronicsworkstationmanual]]
 === Photos ===
@@ Line 19: / Line 24: @@
 https://galley.realraum.at/index.php?/category/184
-=== Front ===
+=== Blog Posts ===
-The front was lasercut to accommodate the different devices.
+  * https://wp.realraum.at/2019/01/lothr-mini-electronics-workbench/
+  * https://wp.realraum.at/2019/02/lothr-mini-electronics-workbench-upgrade/
-  * Black: cut with 100% 60W at 7mm/s
-  * Red: scan-engraved with 12% 60W at 100mm/s
-{{ :xro:loetstationlabornetzteillothrbox2.svg |}}
+=== Front ===
-=== Todo ===
+The front was lasercut to accommodate the different devices.
-  * add electronic load as third element in top slot
+  * Black: cut with 90% 60W at 10mm/s
-  * make serial TTL interface for power supply and electric load accessible on the back
+  * Red: scan-engraved with 18% 60W at 100mm/s
-{{ :xro:loetstationlabornetzteillothrbox3_loadonly.svg |}}
+{{ :xro:loetstationlabornetzteillothrbox3.svg |}}