This is an old revision of the document!
Printing
The printers in r3 are
- a HP LaserJet 8000 in room#1 in the backflat.
- a HP Business Inkjet 2250tn in room#1 in the backflat.
All printers are served by the BeagleBone printerserver on the LAN: drucker.realraum.at.
- The BeagleBone will automagically switch the printer on and off.
- CUPS will automagically list the available printers without installing it in your printing dialog.
- All you need to do is
- be in the realraum Network
- select the desired printer when printing something
To cancel print-jobs use the CUPS Administrative Interface
Details
| Model | HP LaserJet 8000 |
| Printer url | ipp://drucker.realraum.at:631/printers/HP_LaserJet_8000_Series |
| Location | realraum Whg2 Room1 |
| CUPS Driver PCL | hp-laserjet_8000_series-pcl3.ppd |
| CUPS Driver PS | HP-LaserJet_8000-Postscript.ppd |
| Model | HP business injket 2250tn |
| Printer url | ipp://drucker.realraum.at:631/printers/HP_BUSINESS_INKJET_2250 |
| Location | realraum Whg2 Room1 |
| CUPS Driver PCL | |
| CUPS Driver PS | |
known Problems
If it does not work: Check if the tiny white usb-hub has power. Disconnect and Reconnect all USB-cables and power from the tiny white usb-hub. That should be all that's needed, unless the USB-LPT cable has a loose contact inside the cable.