memberpages:xro:lothrelectronicsstation

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
memberpages:xro:lothrelectronicsstation [2026-04-15 07:58] – removed - external edit (Unknown date) 127.0.0.1memberpages:xro:lothrelectronicsstation [2026-04-15 07:58] (current) – ↷ Page moved from xro:lothrelectronicsstation to memberpages:xro:lothrelectronicsstation ruru4143
Line 1: Line 1:
 +{{tag>project}}
 +===== LoTHR mini Electronics Soldering Station =====
  
 +=== Parts ===
 +
 +  * [[https://www.aliexpress.com/item/DP30V5A-Constant-Voltage-current-Programmable-Power-Step-down-Supply-module-Ammeter-buck-regulator-converter-voltmeter/32656627324.html | DP30V5A/DSV3005]]
 +  * [[https://www.aliexpress.com/store/product/KSGER-T12-Soldering-Iron-Station-MIni-STM32-OLED-V2-01-DIY-Kits-FX9501-Electric-Tools-Aluminum/1486111_32948842049.html | KSGER T12 mini Soldering Station]]
 +    * Backside Switch re-used on front
 +  * [[https://www.thingiverse.com/thing:2817722 | T12 Tip Holder]]
 +  * [[https://www.conrad.at/de/schuetzinger-seb-6452-ni-sw-sicherheits-laborbuchse-buchse-einbau-vertikal-stift-o-4-mm-schwarz-1-st-1537941.html| 4x Safety Laboratory Banana Jack]]
 +  * old external SCSI HDD Case
 +  * 2x 5pin Jumper-Wire Jack
 +  * Switching power supply 24V / 3.2A, set to ~27V
 +  * [[https://de.aliexpress.com/item/35-watt-elektronische-last-einstellbare-konstante-strom-aging-widerstand-batterie-spannung-kapazit-t-tester-LCD-spannung/32954356498.html | XY-FZ35 Electronic Load]]
 +  * 1x USB Serial TTL Converter
 +  * 3x Jumper Wires
 +
 +=== Manual ===
 +
 +[[realraum:minielectronicsworkstationmanual]]
 +
 +=== Photos ===
 +
 +https://galley.realraum.at/index.php?/category/184
 +
 +=== Blog Posts ===
 +
 +  * https://wp.realraum.at/2019/01/lothr-mini-electronics-workbench/
 +  * https://wp.realraum.at/2019/02/lothr-mini-electronics-workbench-upgrade/
 +
 +
 +=== Front ===
 +
 +The front was lasercut to accommodate the different devices.
 +
 +  * Black: cut with 90% 60W at 10mm/s
 +  * Red: scan-engraved with 18% 60W at 100mm/s
 +
 +{{ :xro:loetstationlabornetzteillothrbox3.svg |}}