Differences

This shows you the differences between two versions of the page.

--- memberpages:xro:goban [2026-04-15 07:58] – removed - external edit (Unknown date) 127.0.0.1
+++ memberpages:xro:goban [2026-04-15 07:58] (current) – ↷ Page moved from xro:goban to memberpages:xro:goban ruru4143
@@ Line 1: / Line 1: @@
+===== DIY Go-Game, quick and easy =====
+{{ :xro:f0dbb3a0-edb3-442c-a297-2b2e34bb8eab.jpg?nolink&600 |}}
+{{ :xro:e0120719-3140-4e8c-af62-da0661fa86d0.jpg?nolink&600 |}}
+==== process ====
+  - get/find a thick wood plates. Cut to size or two halves. Chop-saw is your friend.
+  - laser-engrave wood
+  - lacquer wood
+  - optionally assemble two halves of wood with hinges
+  - 3D Design some feet for board
+  - 3D print feet
+  - Size and scale board and stones
+  - 3D print stones
+  - 3D print bowl for stones
+I scaled everything, board, stones (and grid) to fit small stones 17.91mm in diameter and 8mm in height.
+==== Sources ====
+  * Stones from this [[https://www.printables.com/model/858542-go-game-traditional-goban-complete-set|model]] by wildshark_524616 \\ Don't use brim, which is a pain to remove. Rather use a SuperTack Printbed or higher temperature to make sure the stones stick.
+  * Bowl from this [[https://www.printables.com/model/1165416-bowl-for-game-of-go-19x19-for-small-stones|model]] (includes stones from above as 3mf Project). A remix of JeremyToutain's FreeCAD model.
+  * {{ :xro:4mmhoshi_19x19_gogame_board_goban.tar.xz |This}} Grid to Laser-engrave from [[http://www.gungfu.de/go/gobans/konstruktion/templates.html|here]]
+  * [[https://www.printables.com/model/1141293-parametric-feet-for-board| Feet Model]]