• DP30V5A/DSV3005
• KSGER T12 mini Soldering Station
  • Backside Switch re-used on front
• T12 Tip Holder
• 4x Safety Laboratory Banana Jack
• old external SCSI HDD Case
• 2x 5pin Jumper-Wire Jack
• Switching power supply 24V / 3.2A, set to ~27V
• XY-FZ35 Electronic Load
• 1x USB Serial TTL Converter
• 3x Jumper Wires

minielectronicsworkstationmanual

https://galley.realraum.at/index.php?/category/184

• https://wp.realraum.at/2019/01/lothr-mini-electronics-workbench/
• https://wp.realraum.at/2019/02/lothr-mini-electronics-workbench-upgrade/

The front was lasercut to accommodate the different devices.

• Black: cut with 90% 60W at 10mm/s
• Red: scan-engraved with 18% 60W at 100mm/s