Differences

This shows you the differences between two versions of the page.

--- 3dprinting:materials [2019-10-17 15:42] – xro
+++ 3dprinting:materials [2025-11-09 09:25] (current) – external edit 127.0.0.1
@@ Line 6: / Line 6: @@
 </WRAP>
+====== The Prusa MK4 provided by mkg ======
+Printing on the //Original Prusa MK4//, provided by member mkg, has the following costs:
+  *  1 cent / 1 g for your own filament
+  *  4 cent / 1 g for filament provided by mkg
+    * 4 (3+1) ct PLA/PETG, 7 (1+6) ct Polycarbonate/PC
+For convenience, just pay 10€ per every 1kg of filament you get for printing in realraum.
+Payments are to be put into the cylindrical container next to the 3D printer in LoTHR labeled something like "3D-Druck Spende".
+> mkg: PSA. If you use your own filament it’s 1ct/g, using mkg’s filament 4ct/g total Just ask mkg if unclear.
+> -> [[https://realraum.at/wiki/doku.php?id=intern:mitgliederabend:protokolle:protokoll_2024-07-08#d-drucker_mk4neue_nutzungsgebuehr_von_1ct_g_zusaetzlich_zur_finanzierung_von_ersatzteilen_usw|source]] (protocol from the Mitgliederabend of 2024-07-08, internal)
 ====== 3D Printing Materials aka Filament in realraum ======
@@ Line 67: / Line 81: @@
       * needs raft for less than 4cm² ground surface
   * PLA 1.75 (for Witbox)
+      * //normal price//
       * Colors in r3: blue, .....
       * Extrusion-temp: 220°C
+  * ABS
+      * //normal price//
 See the [[https://www.lulzbot.com/sites/default/files/v2/LulzBot_3D_Printing_Filament_Guide.pdf|Lulzbot Filament Guide]] on print-settings for various materials.
@@ Line 77: / Line 94: @@
   * Cost is per meter filament (2.85..3mm ø)
-  * Cura (or slicer of your choice) tells you how many meters you will need
+  * Experimental: Cost per g (As we have different filaments widths, this is an attempt at simplification)
+    * if g and m cost disagree, choose cost per m or the average between the two at your discretion
+    * calculated for NGEN. Probably not as applicable for other materials yet.
+  * Cura (or slicer of your choice) tells you how many meters and g you will need
   * We pay per started meter. e.g. you upround
   * Please feed the cat next to the printer with the € before printing
@@ Line 89: / Line 109: @@
   * //5x normal price material//: 0.30€ per gram
-=== for 3mm Filament (Lulzbot) ===
+=== in m for 3mm Filament (Lulzbot) ===
   * //normal price material//: 0.50€ per started meter
@@ Line 95: / Line 115: @@
   * //5x normal price material//: 2.50€ per started meter
-=== for 1.75mm Filament (everything else) ===
+=== in m for 1.75mm Filament (everything else) ===
   * //normal price material//: 0.30€ per started meter
@@ Line 109: / Line 129: @@
   * //5x normal price material//: 0.60€ per gram
-=== for 3mm Filament (Lulzbot) ===
+=== in m for 3mm Filament (Lulzbot) ===
   * //normal price material//: 1.00€ per started meter
@@ Line 115: / Line 135: @@
   * //5x normal price material//: 5.00€ per started meter
-=== for 1.75mm Filament (everything else) ===
+=== in m for 1.75mm Filament (everything else) ===
   * //normal price material//: 0.60€ per started meter
   * //double price material//: 1.20€ per started meter
   * //5x normal price material//: 3.00€ per started meter