Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
| 3dprinting:materials [2018-07-13 23:55] – created xro | 3dprinting:materials [2025-11-09 09:25] (current) – external edit 127.0.0.1 | ||
|---|---|---|---|
| Line 6: | Line 6: | ||
| </ | </ | ||
| + | |||
| + | ====== The Prusa MK4 provided by mkg ====== | ||
| + | |||
| + | Printing on the //Original Prusa MK4//, provided by member mkg, has the following costs: | ||
| + | |||
| + | * 1 cent / 1 g for your own filament | ||
| + | * 4 cent / 1 g for filament provided by mkg | ||
| + | * 4 (3+1) ct PLA/PETG, 7 (1+6) ct Polycarbonate/ | ||
| + | |||
| + | For convenience, | ||
| + | Payments are to be put into the cylindrical container next to the 3D printer in LoTHR labeled something like " | ||
| + | |||
| + | > mkg: PSA. If you use your own filament it’s 1ct/g, using mkg’s filament 4ct/g total Just ask mkg if unclear. | ||
| + | > -> [[https:// | ||
| ====== 3D Printing Materials aka Filament in realraum ====== | ====== 3D Printing Materials aka Filament in realraum ====== | ||
| - | * <del>[[https://www.lulzbot.com/store/filament/hips|HIPS 3mm white]]</ | + | * [[https://colorfabb.com/filaments/co-polyesters-filaments/ngen|nGen from colorFabb]] |
| - | * Spool Length: ~140m | + | * Colors in r3: Black, Purple, Silver (,Blue if you ask DDD) |
| - | * normal price | + | * Extrusion-temp: |
| - | * nice material strength | + | * 2.85mm |
| - | * warps on large surface area | + | * 2.85mm Spool Length 2200g: 270m |
| - | * needs raft for less than 4cm² ground surface | + | * //normal price//, only slightly more expensive than ABS |
| + | * least warping so good for precise prints | ||
| + | * sticks really well to printbed | ||
| + | * recommended | ||
| + | * [[https:// | ||
| + | * Colors in r3: Yellow | ||
| + | * Extrusion-temp: | ||
| + | * SORRY only samples in r3 | ||
| + | * IF YOU USE A SAMPLE: document result using photos!!! | ||
| + | * //expensive price// | ||
| + | * like nGen | ||
| + | * recommended for prints where layering should be hard to see | ||
| * [[https:// | * [[https:// | ||
| - | * Spool Length: 62.7m | + | * Color: translucent white |
| - | * normal price | + | * Extrusion-temp: |
| + | * 3mm Spool Length: 62.7m | ||
| + | * //normal price// | ||
| * awesome material durability and strength | * awesome material durability and strength | ||
| * needs glue and no printbed heat to stick. even so has tendency of warping on large ground surfaces and thus getting loose | * needs glue and no printbed heat to stick. even so has tendency of warping on large ground surfaces and thus getting loose | ||
| * recommended if cheap, small or very durable prints are needed | * recommended if cheap, small or very durable prints are needed | ||
| * [[https:// | * [[https:// | ||
| - | * Spool Length: 56m | + | * Colors in r3: clear, red |
| - | * more expensive, | + | * Extrusion-temp: |
| + | * 3mm Spool Length: 56m | ||
| + | * //double price// | ||
| * translucent | * translucent | ||
| * brittle | * brittle | ||
| - | * [[https:// | + | * [[https:// |
| - | * Spool Length: 56m | + | * Colors in r3: deep blue |
| - | * more expensive, double price | + | * Extrusion-temp: 195-215°C |
| - | * translucent | + | * 3mm Spool Length: ~125m |
| - | * brittle | + | * //normal price// |
| - | * [[https:// | + | |
| - | * Spool Length: ~125m | + | |
| - | * normal price | + | |
| * [[https:// | * [[https:// | ||
| - | * Spool Length: ~30m | + | * Color: steel gray |
| - | * really expensive, 5 times usual price. | + | * Extrusion-temp: |
| + | * 2.85mm | ||
| + | * //5x normal price//, since it' | ||
| * brittle on small features but durable like PLA and heavy on bigger pieces | * brittle on small features but durable like PLA and heavy on bigger pieces | ||
| * sticks really well on printbed. do not use glue or can forget about getting your print off the bed | * sticks really well on printbed. do not use glue or can forget about getting your print off the bed | ||
| * [[https:// | * [[https:// | ||
| - | * Spool Length: ~5m | + | * Color: translucent white |
| + | * Extrusion-temp: | ||
| + | * 3mm Spool Length: ~5m | ||
| * use only for cleaning and when changing filaments | * use only for cleaning and when changing filaments | ||
| - | * [[https:// | + | * <del>[[https:// |
| - | * Spool Length 750g: ~95m | + | * Colors in r3: < |
| - | * Spool Length | + | * Extrusion-temp: |
| - | * only slightly more expensive | + | * Spool Length: |
| - | * least warping so good for precise prints | + | * //normal price// |
| - | * sticks really well to printbed | + | * nice material strength |
| - | * recommended | + | * warps on large surface area |
| + | * needs raft for less than 4cm² ground surface | ||
| + | * PLA 1.75 (for Witbox) | ||
| + | * //normal price// | ||
| + | * Colors in r3: blue, ..... | ||
| + | * Extrusion-temp: | ||
| + | * ABS | ||
| + | * //normal price// | ||
| See the [[https:// | See the [[https:// | ||
| Line 54: | Line 91: | ||
| See also the [[https:// | See also the [[https:// | ||
| + | ===== Cost and Prices ===== | ||
| + | |||
| + | * Cost is per meter filament (2.85..3mm ø) | ||
| + | * Experimental: | ||
| + | * if g and m cost disagree, choose cost per m or the average between the two at your discretion | ||
| + | * calculated for NGEN. Probably not as applicable for other materials yet. | ||
| + | * Cura (or slicer of your choice) tells you how many meters and g you will need | ||
| + | * We pay per started meter. e.g. you upround | ||
| + | * Please feed the cat next to the printer with the € before printing | ||
| + | |||
| + | ==== for members ==== | ||
| + | |||
| + | === in gramm === | ||
| + | |||
| + | * //normal price material//: 0.06€ per gram | ||
| + | * //double price material//: 0.12€ per gram | ||
| + | * //5x normal price material//: 0.30€ per gram | ||
| + | |||
| + | === in m for 3mm Filament (Lulzbot) === | ||
| + | |||
| + | * //normal price material//: 0.50€ per started meter | ||
| + | * //double price material//: 1.00€ per started meter | ||
| + | * //5x normal price material//: 2.50€ per started meter | ||
| + | |||
| + | === in m for 1.75mm Filament (everything else) === | ||
| + | |||
| + | * //normal price material//: 0.30€ per started meter | ||
| + | * //double price material//: 0.60€ per started meter | ||
| + | * //5x normal price material//: 1.50€ per started meter | ||
| + | |||
| + | ==== for guests ==== | ||
| + | |||
| + | === in gramm === | ||
| + | |||
| + | * //normal price material//: 0.12€ per gram | ||
| + | * //double price material//: 0.24€ per gram | ||
| + | * //5x normal price material//: 0.60€ per gram | ||
| + | |||
| + | === in m for 3mm Filament (Lulzbot) === | ||
| + | |||
| + | * //normal price material//: 1.00€ per started meter | ||
| + | * //double price material//: 2.00€ per started meter | ||
| + | * //5x normal price material//: 5.00€ per started meter | ||
| + | |||
| + | === in m for 1.75mm Filament (everything else) === | ||
| + | |||
| + | * //normal price material//: 0.60€ per started meter | ||
| + | * //double price material//: 1.20€ per started meter | ||
| + | * //5x normal price material//: 3.00€ per started meter | ||